|
Software
Upgrades |
|
|

RacerMate One Software Upgrade
Upgrade previous CompuTrainers to
RacerMate One
software if you have been using computer-based CompuTrainers in the past.
Need to try it before you buy it? You
can download a demo version
here which will
do everything short of connecting to the trainer. It will allow you to
see the features and determine everything runs well on your computer.
If you are using a Nintendo system, you will still need a Full System Upgrade
as listed below, as well as the upgrade to RacerMate One (this upgrade). |
Introductory Priced
$189.95
|
|
|
Handlebar Controller Upgrades |
|
|
|
CompuTrainer
Aerodynamic Drag Factor "Plus" Upgrade (Pro and Lab CT's ONLY)
Includes cost of upgrading to version 45.43
Handlebar Controller program chip to add Aerodynamic Drag Factor to
existing Pro and Lab CompuTrainers.
|
$49.95 |
|
|
Wireless Heart Rate Upgrades |
|
|

Wireless
Heart Rate System
Polar Coded Compatible
Now includes new diagnostic hardware!
(Requires Handlebar Controller version 25.41 or
higher.)
NOT compatible with any previous RacerMate chest straps. Must
use a Polar™ brand coded or non-coded strap. Coded straps required for
multiple riders in the same area; i.e., MultiRider. |
$72.95
(including 15% on-line discount) |
|

Wireless
Heart Rate System
Polar™ Coded Compatible- Retrofit to DragFactor
capability included!
Now includes new diagnostic hardware!
(for Pro and Lab CompuTrainers ONLY.
Includes Handlebar Controller program chip ver. 45.43, which includes new
heart rate code and Drag Factor functions.)
To replace a faulty Wireless Systems which are out-of-warranty, please go
here.
NOT compatible with any previous RacerMate chest straps. Must
use a Polar™ brand coded or non-coded strap. Coded straps required for
multiple riders in the same area; i.e., MultiRider. |
$97.95
(including 15% on-line discount) |
|
|
Full System Upgrades |
|
|
Second Trainer PC Interface Kit -
PRO or LAB Load Generators ONLY
Pro or Plus version available. This kit is for Nintendo customers
who own two PRO or LAB Nintendo (NES) version CompuTrainers. The NES
upgrades found above include upgrading the first CompuTrainer and this kit
will cover
upgrading the second CompuTrainer (where no PC software is needed).
Includes Handlebar Program Chip 45.43 and a
USB adapter.
This kit IS NOT NEEDED if you
already own a PC based second CompuTrainer and are wanting Drag Factor.
Order the 45.43 upgrade found in the Handlebar Controller Upgrades section
for this. |
$119.90 |
Pro Version
(allows Drag Factor)
|
Second Trainer PC Interface Kit
PLUS NES Users
This kit is for Nintendo
customers who own two Nintendo (NES) version CompuTrainers and one was a
PLUS model (a Standard 6000 or 8000 Load Generator and a PRO 8001 or 8002
Handlebar Controller). The NES upgrades
found above include upgrading the first CompuTrainer and this kit will cover
upgrading the second CompuTrainer (where no PC software is needed).
Includes:
"old"
Plus
(v27.41) Handlebar Program
chip and USB adapter.
PLEASE NOTE: The older "Plus" 27.41 chip listed
here IS NOT the same as the 45.43 Drag Factor "Plus" program
advertised and listed above in the Handlebar Controller Upgrades section.
Note: If you need Drag Factor you will need to order a Pro upgrade as
this feature is not available to a Standard CompuTrainer.
|
$119.90 |
"older" Plus Version
(DOES NOT
add
Drag Factor)
|